NCF参数化建筑论坛

标题: Autodesk 出2014版的软件了。。。。。。。 [打印本页]

作者: Page 时间: 2013-3-31 16:33
标题: Autodesk 出2014版的软件了。。。。。。。
本帖最后由 Page 于 2013-4-2 13:20 编辑

Autodesk 出2014版的软件了，，

楼下有大神已经放出下载地址了，，，

给大家个注册机地址
http://pan.baidu.com/share/link?shareid=399598&uk=1026168496

http://pan.baidu.com/share/link?shareid=373525&uk=2184122736

作者: 做不做啥 时间: 2013-3-31 23:18
还在用2008的飘过

作者: thinksong 时间: 2013-4-1 11:46
AUTOCAD
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACD/DLM/AutoCAD_2014_Italian_Win_32bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACD/DLM/AutoCAD_2014_Italian_Win_64bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACD/DLM/AutoCAD_2014_English_Win_32bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACD/DLM/AutoCAD_2014_English_Win_64bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACD/DLM/AutoCAD_2014_German_Win_32bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACD/DLM/AutoCAD_2014_German_Win_64bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACD/DLM/AutoCAD_2014_French_Win_32bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACD/DLM/AutoCAD_2014_French_Win_64bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACD/DLM/AutoCAD_2014_Brazilian_Portuguese_Win_32bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACD/DLM/AutoCAD_2014_Brazilian_Portuguese_Win_64bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACD/DLM/AutoCAD_2014_Simplified_Chinese_Win_64bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACD/DLM/AutoCAD_2014_Simplified_Chinese_Win_32bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACD/DLM/AutoCAD_2014_Traditional_Chinese_Win_64bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACD/DLM/AutoCAD_2014_Traditional_Chinese_Win_32bit_dlm.sfx.exe

AUTOCAD LT: for non-ENG, change English with your language (Italian, German, French, etc.), just like Autocad links above
h-ttp://trial.autodesk.com/SWDLDNET3/2014/ACDLT/DLM/AutoCADLT_2014_SWL_English_Win_32bit_dlm.sfx.exe
htt-p://trial.autodesk.com/SWDLDNET3/2014/ACDLT/DLM/AutoCADLT_2014_SWL_English_Win_64bit_dlm.sfx.exe

AUTOCAD ARCHITECTURE (ENG only ATM)
ht-tp://trial.autodesk.com/SWDLDNET3/2014/ARCHDESK/DLM/AutoCAD_Architecture_2014_English_Win_32bit_dlm.sfx.exe
ht-tp://trial.autodesk.com/SWDLDNET3/2014/ARCHDESK/DLM/AutoCAD_Architecture_2014_English_Win_64bit_dlm.sfx.exe

AUTOCAD ELECTRICAL (ENG only ATM)
ht-tp://trial.autodesk.com/SWDLDNET3/2014/ACAD_E/DLM/AutoCAD_Electrical_2014_English_Win_32bit_dlm.sfx.exe
ht-tp://trial.autodesk.com/SWDLDNET3/2014/ACAD_E/DLM/AutoCAD_Electrical_2014_English_Win_64bit_dlm.sfx.exe

AUTOCAD MECHANICAL (ENG only ATM)
ht-tp://trial.autodesk.com/SWDLDNET3/2014/AMECH_PP/DLM/AutoCAD_Mechanical_2014_English_Win_32bit_dlm.sfx.exe
ht-tp://trial.autodesk.com/SWDLDNET3/2014/AMECH_PP/DLM/AutoCAD_Mechanical_2014_English_Win_64bit_dlm.sfx.exe

AUTOCAD MEP (ENG only ATM)
ht-tp://trial.autodesk.com/SWDLDNET3/2014/BLDSYS/DLM/AutoCAD_MEP_2014_English_Win_32bit_dlm.sfx.exe
ht-tp://trial.autodesk.com/SWDLDNET3/2014/BLDSYS/DLM/AutoCAD_MEP_2014_English_Win_64bit_dlm.sfx.exe

AUTOCAD PLANT3D (ENG only ATM)
ht-tp://trial.autodesk.com/SWDLDNET3/2014/PLNT3D/DLM/AutoCAD_Plant_3D_2014_English_Win_32bit_dlm.sfx.exe
ht-tp://trial.autodesk.com/SWDLDNET3/2014/PLNT3D/DLM/AutoCAD_Plant_3D_2014_English_Win_64bit_dlm.sfx.exe

AUTOCAD P&ID (ENG only ATM)
ht-tp://trial.autodesk.com/SWDLDNET3/2014/PNID/DLM/AutoCAD_PNID_2014_English_Win_32bit_dlm.sfx.exe
ht-tp://trial.autodesk.com/SWDLDNET3/2014/PNID/DLM/AutoCAD_PNID_2014_English_Win_64bit_dlm.sfx.exe

AUTOCAD RASTER DESIGN (ENG only ATM)
ht-tp://trial.autodesk.com/SWDLDNET3/2014/ARDES/DLM/AutoCAD_Raster_Design_2014_English_Win_32bit_dlm.sfx.exe
ht-tp://trial.autodesk.com/SWDLDNET3/2014/ARDES/DLM/AutoCAD_Raster_Design_2014_English_Win_64bit_dlm.sfx.exe

INVENTOR products
LT
ht-tp://trial.autodesk.com/SWDLDNET3/2014/INVLT/DLM/Autodesk_Inventor_LT_2014_English_Win_32bit_dlm.sfx.exe
ht-tp://trial.autodesk.com/SWDLDNET3/2014/INVLT/DLM/Autodesk_Inventor_LT_2014_English_Win_64bit_dlm.sfx.exe

3dsmax/Design (X64 only)
h-ttp://trial.autodesk.com/SWDLDNET3/2014/3DSMAX/DLM/Autodesk_3ds_Max_2014_EFGJKS_Win_64bit_dlm.sfx.exe
htt-p://trial.autodesk.com/SWDLDNET3/2014/MAXDES/DLM/Autodesk_3ds_Max_Design_2014_EFGJKS_Win_64bit_dlm.sfx.exe

SOFTIMAGE (X64 only)
ht-tp://trial.autodesk.com/SWDLDNET3/2014/SFTIM/DLM/Autodesk_Softimage_2014_English_Japanese_Win_64bit_dlm.sfx.exe

ALIAS AUTOMOTIVE
h-ttp://trial.autodesk.com/SWDLDNET3/2014/AUTOST/DLM/Autodesk_AAUTO_2014_English_Win_32bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/AUTOST/DLM/Autodesk_AAUTO_2014_English_Win_64bit_dlm.sfx.exe
ALIAS SURFACE
h-ttp://trial.autodesk.com/SWDLDNET3/2014/SURFST/DLM/Autodesk_ASURF_2014_English_Win_32bit_dlm.sfx.exe
h-ttp://trial.autodesk.com/SWDLDNET3/2014/SURFST/DLM/Autodesk_ASURF_2014_English_Win_64bit_dlm.sfx.exe

INFRASTRUCTURE MAP SERVER
ht-tp://trial.autodesk.com/SWDLDNET3/2014/IMS/DLM/Autodesk_Infrastructure_Map_Server_2014_English_Win_32bit_dlm.sfx.exe
ht-tp://trial.autodesk.com/SWDLDNET3/2014/IMS/DLM/Autodesk_Infrastructure_Map_Server_2014_English_Win_64bit_dlm.sfx.exe

REVIT MEP, ARCHITECTURE, STRUCTURE, LT
ht-tp://trial.autodesk.com/SWDLDNET3/2014/REVIT/DLM/Autodesk_Revit_Architecture_2014_English_Win_32-64bit_dlm.sfx.exe
ht-tp://trial.autodesk.com/SWDLDNET3/2014/REVITST/DLM/Autodesk_Revit_Structure_2014_English_Win_32-64bit_dlm.sfx.exe
ht-tp://trial.autodesk.com/SWDLDNET3/2014/RVTMPB/DLM/Autodesk_Revit_MEP_2014_English_Win_32-64bit_dlm.sfx.exe
ht-tp://trial.autodesk.com/SWDLDNET3/2014/RVTLT/DLM/Autodesk_Revit_LT_2014_English_Win_32-64bit_dlm.sfx.exe

SIMULATION products
CFD
ht-tp://trial.autodesk.com/SWDLDNET3/2014/SCFD/DLM/Autodesk_Simulation_CFD_2014_Multilingual_Win_32bit_dlm.sfx.exe
ht-tp://trial.autodesk.com/SWDLDNET3/2014/SCFD/DLM/Autodesk_Simulation_CFD_2014_Multilingual_Win_64bit_dlm.sfx.exe

作者: thinksong 时间: 2013-4-1 11:47
本帖最后由 thinksong 于 2013-4-28 01:01 编辑

下載，記得更改 http

作者: Page 时间: 2013-4-1 13:02

thinksong 发表于 2013-4-1 11:47

登录/注册后可看大图

迅雷下載，記得更改 http

感谢大神~~

作者: Page 时间: 2013-4-1 13:09

thinksong 发表于 2013-4-1 11:47

登录/注册后可看大图

迅雷下載，記得更改 http

注册机呢。。。

作者: thinksong 时间: 2013-4-1 15:09

Page 发表于 2013-4-1 13:09

登录/注册后可看大图

注册机呢。。。

要不要給你買個電腦安裝好注冊好啊，在給你配個專業畫圖員，還是個美女畫圖元啊，穿著比基尼的畫圖員？注冊機漫天飛了，趕快去下載吧，隨便一搜就來了。哈哈

作者: Page 时间: 2013-4-2 10:52

thinksong 发表于 2013-4-1 15:09

登录/注册后可看大图

要不要給你買個電腦安裝好注冊好啊，在給你配個專業畫圖員，還是個美女畫圖元啊，穿著比基尼的畫圖員？注 ...

好吧。。。。。。

作者: thinksong 时间: 2013-4-3 02:54

Page 发表于 2013-4-2 10:52

登录/注册后可看大图

好吧。。。。。。

Yoho，你奉獻的很快啊

作者: hyycq 时间: 2013-4-3 12:52
还在用2008的飘过

作者: lamborghin 时间: 2013-6-14 09:25
还在用2004的飘过
升级太快

欢迎光临 NCF参数化建筑论坛 (http://bbs.ncf-china.com/)