<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>NCF参数化建筑论坛 - 方案中期［优化］</title>
    <link>http://bbs.ncf-china.com/forum.php?mod=forumdisplay&amp;fid=143</link>
    <description>Latest 20 threads of 方案中期［优化］</description>
    <copyright>Copyright(C) NCF参数化建筑论坛</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Sat, 16 May 2026 06:51:37 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://bbs.ncf-china.com/static/image/common/logo_88_31.gif</url>
      <title>NCF参数化建筑论坛</title>
      <link>http://bbs.ncf-china.com/</link>
    </image>
    <item>
      <title>幕墙分缝 按距离等分 余数分两边</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=55806</link>
      <description><![CDATA[本人新手，第一次尝试解决简单幕墙分缝问题。众所周知，幕墙分缝最好按照模数尺寸来划分，边角用非整数填充，而一般是插件只能按数量等分，如果幕墙本身不是整数就难以找到模数。抛砖引玉一下，目前只能输入一个垂直曲面面，复杂曲面还无解，求大神给点思路。
我打了个 ...]]></description>
      <category>方案中期［优化］</category>
      <author>ADAMF</author>
      <pubDate>Wed, 13 Jan 2021 02:24:28 +0000</pubDate>
    </item>
    <item>
      <title>这种模型是GH设计出来的吗</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=55239</link>
      <description><![CDATA[这种到底什么建模型，请教下艺术家：Michael Murphy（迈克·墨菲）美国装置艺术家2019-9-15 02:55[/backcolor]
艺术家：Michael Murphy（迈克·墨菲）美国装置艺术家Michael Murphy（迈克·墨菲）1975年出生于美国俄亥俄州，现在居住在美国乔治亚州并在乔治亚州大学任 ...]]></description>
      <category>方案中期［优化］</category>
      <author>ping88</author>
      <pubDate>Sat, 14 Sep 2019 19:24:09 +0000</pubDate>
    </item>
    <item>
      <title>随机分格条件限制问题</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=54870</link>
      <description><![CDATA[随机得到的分格，想到到以下目的，最大板块占比总体板块的20%，中等板块占总体板块的30%，横向风格同一高度不要连续超过3块，求大神指点，谢谢]]></description>
      <category>方案中期［优化］</category>
      <author>pytianjun</author>
      <pubDate>Fri, 09 Nov 2018 07:30:54 +0000</pubDate>
    </item>
    <item>
      <title>不规则幕墙固定尺寸细分</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=44678</link>
      <description><![CDATA[幕墙细分为1000*1000的平面矩形，不按结构线走。
简单说一下思路，首先提取曲面的上边线，向下作偏移，按固定距离细分最上边的曲线，找点到相邻那条线的最近点，用polygon分别连接点，最后用loft放样可以得到平形四边形。下面的几个曲面重复第一个步骤。
都是些简单的 ...]]></description>
      <category>方案中期［优化］</category>
      <author>欧阳天武</author>
      <pubDate>Thu, 02 Mar 2017 08:53:38 +0000</pubDate>
    </item>
    <item>
      <title>建材系列作品鉴赏06-竹钢</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=44552</link>
      <description><![CDATA[竹子这种材料大家一听就知道环保等级相当好了，目前竹制品集成材陆续出现在市场，其性能与传统木料相比，有过之而无不及。一些加工过的竹材装饰板甚至要比一些木材更具质感表达。所以这里向大家推荐，另外要特别注意两点：一、普遍竹材耐火等级为B级，不宜在防火等级高 ...]]></description>
      <category>方案中期［优化］</category>
      <author>NCF</author>
      <pubDate>Wed, 07 Dec 2016 05:12:18 +0000</pubDate>
    </item>
    <item>
      <title>建材系列作品鉴赏-05 消失的魔术</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=44531</link>
      <description><![CDATA[做建筑的都听过“消隐”这个词汇。当一个建筑体量在环境中过于突兀的时候，设计师总是希望能把它化解在环境里。我们有时候尝试很多办法来实现“消隐”现象，但是真正用到这种镜面不锈钢板的人并不多，它往往点缀在建筑主体的局部让人产生视线上的错觉，算是鬼斧神差的一 ...]]></description>
      <category>方案中期［优化］</category>
      <author>NCF</author>
      <pubDate>Wed, 30 Nov 2016 09:49:28 +0000</pubDate>
    </item>
    <item>
      <title>建材系列作品鉴赏-04 锈钢板</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=44523</link>
      <description><![CDATA[锈钢板，顾名思义就是钢板锈了，Fe2O3。钢板硬朗的线条感在现代建筑风格中表现很好，而生锈的痕迹又给这种材质一种独特的沧桑感。因此，这种材料时常会出现在一些新老建筑交替的环境中，既复古又有现代感。













更多案例打包下载，回复可见：
* ...]]></description>
      <category>方案中期［优化］</category>
      <author>NCF</author>
      <pubDate>Mon, 28 Nov 2016 11:35:17 +0000</pubDate>
    </item>
    <item>
      <title>建材系列作品鉴赏-03 钛锌板</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=44472</link>
      <description><![CDATA[钛锌板算是金属建材当中的高端材料了，成熟于航空航天领域。材料耐腐蚀，抗打击，防水性能理想。（没错，它是用来做飞机的~）由于价格昂贵的原因，国内有很多替代产品，如铝镁锰板等，但实际效果和性能一定不会有这个理想。

代表作品是大家最熟悉的国家大剧院，由于 ...]]></description>
      <category>方案中期［优化］</category>
      <author>NCF</author>
      <pubDate>Thu, 17 Nov 2016 08:21:55 +0000</pubDate>
    </item>
    <item>
      <title>建材系列作品鉴赏-02 GRC板</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=44436</link>
      <description><![CDATA[GRC挂板，这个技术在国内已经很普及了，厂家都开始直接要Rhino模型帮助分模了。。应该说他一种强度较高的水泥外挂拆了，质感非常接近清水混凝土，但是实际安装的时候类似干挂石材的做法，背后有龙骨的。大家都理解水泥是一种可塑性极强的材料，同样GRC配合数控加工的钢 ...]]></description>
      <category>方案中期［优化］</category>
      <author>NCF</author>
      <pubDate>Mon, 07 Nov 2016 10:51:13 +0000</pubDate>
    </item>
    <item>
      <title>参数化双层网壳设计问题</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=44432</link>
      <description><![CDATA[今天想用参数化设计一个双层的圆形网架，下弦已经设计完成，汇总的下弦都已经是直线且都拍平，目前想将下弦线组成一个个的网格面，找到各个面的中心点，最终推出上弦的网格点。使用了VIPERS插件的“封闭四边曲线”但好像效果不佳，且很占用内存。
请问有什么更好的方法 ...]]></description>
      <category>方案中期［优化］</category>
      <author>Martini</author>
      <pubDate>Fri, 04 Nov 2016 13:49:33 +0000</pubDate>
    </item>
    <item>
      <title>建材系列作品鉴赏-01 穿孔铝板</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=44431</link>
      <description><![CDATA[十一月新番！开启崭新的建筑材料观光之旅~

我记得从前在学校的时候，很少关心建材，一方面课本旧接触不到新东西，一方面只重视方案前期概念，离后期实现距离较远。但参与项目多年之后才发现其实对材料的理解和应用对效果实现度的影响非常大。质感影响光影，同样影响 ...]]></description>
      <category>方案中期［优化］</category>
      <author>NCF</author>
      <pubDate>Fri, 04 Nov 2016 02:41:28 +0000</pubDate>
    </item>
    <item>
      <title>屋面网架结构线自动生成算法</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=44102</link>
      <description><![CDATA[算法为基于自由曲面、轮廓线、平面柱网等参量自动生成符合结构要求的屋面网架体系。

文件内所有标记参数均为实际工程中需要反复控制的数据，所以格式上会略显繁琐，难点的位置是边缘圈梁需要特殊加固。

线模一键生成之后就可以转结构了，强调发结构的数据需为直线 ...]]></description>
      <category>方案中期［优化］</category>
      <author>skywoolf</author>
      <pubDate>Fri, 04 Mar 2016 08:38:04 +0000</pubDate>
    </item>
    <item>
      <title>山海云天--风景区瞭望塔优化设计经验分享</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=25387</link>
      <description><![CDATA[分享一个13年风景区瞭望塔方案中标项目的中期优化心得。

前期中标方案：【山·海·云·天】  最初我们的设想是在山海天之间做几片“云”，所塔身的设计上尽量的纤细通透，材质采用高反的不锈钢金属面，使立柱表面反射环境从而在视觉上一定程度的消隐。塔身不是很高， ...]]></description>
      <category>方案中期［优化］</category>
      <author>skywoolf</author>
      <pubDate>Tue, 28 Jul 2015 08:11:25 +0000</pubDate>
    </item>
    <item>
      <title>序列：一个超高层建筑的数字化设计工作记录</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=25363</link>
      <description><![CDATA[请使用最高画面等级观看如果未看到视频窗口，请刷新优酷，土豆，腾讯，YouTube，Vimeo都能同名搜索，并有无旁白纯音乐版本（YouTube，Vimeo随后上传）| 视频截图 |▍用生物基因与生长条件形成的相似生物干个体来类比超高层建筑楼层的统一与差异。▍实时的塔楼体量调整与 ...]]></description>
      <category>方案中期［优化］</category>
      <author>yanhui314</author>
      <pubDate>Sun, 28 Jun 2015 09:04:47 +0000</pubDate>
    </item>
    <item>
      <title>补上之前剧院设计的视线gh文件</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=25282</link>
      <description><![CDATA[]]></description>
      <category>方案中期［优化］</category>
      <author>jasonroc</author>
      <pubDate>Sun, 12 Apr 2015 13:42:26 +0000</pubDate>
    </item>
    <item>
      <title>郑州T2吊顶方案</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=25269</link>
      <description><![CDATA[2年前有幸参与到郑州机场T2航站楼的设计中，航站楼吊顶形式是领导定的，我只负责建模。
六边形方案是一个过程方案，被弃原因是看上去和深圳机场相似，怕误会为山寨（也有可能领导考虑实施难度的问题），因此被弃。
4500方格方案是实施方案，9000方格方案是对比方案。 ...]]></description>
      <category>方案中期［优化］</category>
      <author>crowncc</author>
      <pubDate>Wed, 01 Apr 2015 02:48:06 +0000</pubDate>
    </item>
    <item>
      <title>可展的扭曲曲面展开（幕墙实际应用）-工作记录</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=22639</link>
      <description><![CDATA[很久前就想编写个程序：用GH或rhinoscript 展开扭曲的曲面（可展的曲面），但参考了很多vb代码始终没能把它给写出来。最近有个工程是扭曲的飘带，材料为铝单板，分格后单块板子类似于圆锥体，但几百块铝板没有一块是相同的。一块铝板分两个大面焊接，两个大面加两个 ...]]></description>
      <category>方案中期［优化］</category>
      <author>wangjunxiong</author>
      <pubDate>Wed, 07 Aug 2013 13:50:06 +0000</pubDate>
    </item>
    <item>
      <title>韩国首尔龙舞大厦（舞龙双子塔）- 先上外表皮-然后慢慢赶工</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=22473</link>
      <description><![CDATA[时间有限先上外表皮  ，之后慢慢上传整个文件。 

ps：电池图貌似可以简化，求大神指点。  刚学就得勤快点啊

更新：主体的逻辑思路还没有完，先上个过程图片吧  2013-7-24


更新：主体框架已好，外置小塔生产加工中，外表皮还没有贴上去。2013-7-24 PM5:40

 ...]]></description>
      <category>方案中期［优化］</category>
      <author>刑天刑天</author>
      <pubDate>Tue, 23 Jul 2013 09:50:43 +0000</pubDate>
    </item>
    <item>
      <title>gh自由曲面幕墙细化 （实际项目应用）</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=12749</link>
      <description><![CDATA[曲面标准化构件化 ，是一直困扰我们做曲面造型的问题。
今天有点思路，希望大家看到后也想看有没有好的办法，这个思路还是很多问题，先就不上传了，以后奉上。]]></description>
      <category>方案中期［优化］</category>
      <author>ping88</author>
      <pubDate>Wed, 08 Aug 2012 06:43:41 +0000</pubDate>
    </item>
    <item>
      <title>据2维平面线作出动感楼梯</title>
      <link>http://bbs.ncf-china.com/forum.php?mod=viewthread&amp;tid=7471</link>
      <description><![CDATA[根据2维平面线作出动感楼梯，希望大家优化，我的电池有点多。]]></description>
      <category>方案中期［优化］</category>
      <author>ping88</author>
      <pubDate>Fri, 30 Sep 2011 19:56:16 +0000</pubDate>
    </item>
  </channel>
</rss>