Robots in Architecture

arvin1018 · 发表于 2010-11-12 05:29:33

Robots in Architecture Sigrid Brell-Cokcan e Johannes Braumann他們發行了非常有趣的論文發表在2010年和阿卡迪亞題為“一個新的參數化設計工具銑削機器人” (原地址為google文件，china朋友可能沒辦法下載，因此上傳到個人空間收點照度) 模型和ghx檔案及論文pdf下載共6.3mb

购买主题 已有 13 人购买 本主题需向作者支付 2 lux照度 才能浏览

panhao1 · 发表于 2010-11-12 20:12:29

本帖最后由 panhao1 于 2010-11-12 20:28 编辑 blogspot 一直处于封印状态国内看不了的总得有个预览神马的不然就坑爹了 Research In 2006, the innovative project “Geometric model building with CNC technology” at Vienna University of Technology acquired an industrial 7-axis robot. The KRH60 KUKA Robot is used at the Faculty of Architecture as a cooperative effort of the Institute of Architectural Sciences/ IEMAR-Digital Architecture and Planning , the Institute of Art and Design/ Three-dimensional Design and Model Building and the Institute of Discrete Mathematics and Geometry.

登录/注册后可看大图

This state of the art machine is primarily used for CNC Milling and offers numerous advantages : The non-linear, spherical workspace is comparatively big, undercuts are possible and complex surfaces can be approximated more efficiently. The utilization of its seven axes (six robot axes with an additional turntable) enables the use of entirely new milling processes in architecure like freeform flank milling, which is physically impossible with a three axis milling machine. Our research focuses on the innovative use of CNC-Technologies, the implementation of parametric design to production and the exact consideration of geometric properties. PUBLICATIONS: Brell-Cokcan S., and J. Braumann. (2010). A New Parametric Design Tool for Robot Milling. In Life In:Formation - Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture, ACADIA, New York: 357-363 Brell-Cokcan S., M. Reis, H. Schmiedhofer, and J. Braumann. (2009). Digital Design to Digital Production: Flank Milling with a 7-Axis Robot and Parametric Design. In Computation: The New Realm of Architectural Design – Proceedings of the 27th eCAADe Conference, Istanbul: 323-330 Aigner, A., Brell-Cokcan, S.: 2009, Surface Structures and Robot Milling- The Impact of Curvilinear Structured Architectural Scale Models on Architectural Design and Production, in I. Paoletti (ed), Innovative Design & Construction Technologies - Building complex shapes and beyond, Milano, Maggiooli Editore, pp. 433-445.

aqiangjlq · 发表于 2010-11-12 20:35:02

好东西，，看下

sry · 发表于 2010-11-14 19:52:48

先看看。。。。。。。。

chickluck · 发表于 2010-11-15 18:06:48

要学的东西太多了照度不够用呀呵呵谢谢分享了

wonderful · 发表于 2011-1-21 17:08:31

看不到啊，东西在网盘都不行了

wangbaoding123 · 发表于 2011-1-24 17:01:55

谢谢分享，先看看

cgfan · 发表于 2011-7-28 16:48:52

认真看一下，有参考价值

owenandselena · 发表于 2011-8-21 22:46:05

1# arvin1018

帐号		自动登录	找回密码
密码			注册

arvin1018 arvin1018 当前离线积分 1459	电梯直达 1^m 发表于 2010-11-12 05:29:33 \| 只看该作者 \|倒序浏览 \|阅读模式登录/注册后可看大图登录/注册后可看大图 Robots in Architecture Sigrid Brell-Cokcan e Johannes Braumann他們發行了非常有趣的論文發表在2010年和阿卡迪亞題為“一個新的參數化設計工具銑削機器人” (原地址為google文件，china朋友可能沒辦法下載，因此上傳到個人空間收點照度) 模型和ghx檔案及論文pdf下載共6.3mb 购买主题已有 13 人购买本主题需向作者支付 2 lux照度才能浏览
arvin1018 arvin1018 当前离线积分 1459	分享到: QQ好友和群 QQ空间腾讯微博腾讯朋友收藏0 分享
	回复举报

[外文资源] Robots in Architecture